Rimage AutoPrism Manual de usuario descargar pdf (Pagina 10)

Using Perfect Print

Correct the Alignment

Use the following procedures to correct the centering alignment and the rotational alignment.

Centering Adjustment

1. Examine the positions of the four centering marks, the top margin alignment mark, and the left margin

alignment mark.

2. If necessary, correct the Top Margin alignment:

a. In the Top Margin field, enter the value which the top margin alignment mark indicates.

 Note: The top margin value can be any value from 0 to 150 in whole number increments. If the

alignment mark indicates beyond the 0–150 area, enter 0 or 150.

b. Wipe the disc with 99% isopropyl alcohol and a soft cloth to remove the alignment marks from the

calibration disc.

 Note: If your calibration disc was made on a Prism printer, use a new alignment disc each time.

c. Place the disc in bin 1.

d. If your autoloader has a front door, make sure that the front door is closed.

e. In the Rotational Calibration window select Test. New centering marks print on the calibration disc.

f. Repeat steps a – e until the alignment mark prints at the center line (75) of the top margin grid.

Left Margin

Alignment Mark

Centering Marks

Top Margin

Alignment Mark

3. If necessary, correct the Left Margin alignment:

a. In the Left Margin field, enter the value which the left margin alignment mark indicates.

 Note: The left margin value can be any value from 0 to 10 in whole number increments. If the

alignment mark indicates beyond the 0–10 area, enter 0 or 10.

b. Wipe the disc with isopropyl alcohol and a soft cloth to remove the alignment marks from the calibration

disc.

 Note: If your calibration disc was made on a Prism printer, use a new alignment disc each time.

c. Place the disc in bin 1.

8 110873_C

1 2 ... 5 6 7 8 9 10 11 12

Sin comentarios

Rimage AutoPrism Manual de usuario Pagina 10